CATIA INTERVIEW QUESTIONS PART - 3

                                      Here are some interview questions for CATIA V5

 

 

1. Where do we use axis?

    Axis is used in creating shaft (revolved) feature.

2. Can we redefine the sketches?

    Yes.

3. Can axis be converted into line or vice versa?

    We can convert line into axis but axis cannot convert into line.

4. How many axis can be created in a single sketch?

    Only one axis can be created in a sketch, if more than one axis are drawn then only one of
    them, the latest one, will be axis and others will be converted into reference elements.

5. How do we change, sketch's reference plane?

    Right click on the sketch whose reference plane is to be changed and select the change
    reference plane and then select new reference.

6. What is the function of mirror command in sketch?

    Mirror command in sketch will create a copy of the sketch about a reference plane.

7. If I donor want the relation b/w original and mirrored elements what should I do?

    Explore and the relation b/w the original and mirror element doesn't exit.

8. What is the use of isolate in sketcher workbench?

    Isolated is used when 3D geometry is projected on to a sketch in order to be modified and
    used as part of the sketch's profile.

9. Can we select non-planer surf ace as sketch plane?

    No, we cannot select a non-planar surface as sketch.

10. What are the different options available in quick trim command?

    BREAK & RUBBER in removes part of the element, which is clicked.
    BREAK & RUBBER out removes part of the element, which is not clicked.
    BREAK & KEEP keeps both parts of elements after breaking.

11. What do CATIA P1, CATIA P2 AND CATIA P3 mean?

    P1, P2 and P3 will indicate the different types of platforms of CATIA. Higher the number
    sophisticated will be the software.

12. What is kernel?

    The kernel is the basic indispensable part of an operating system that allocates resources
    such as low-level hardware interfaces & security.

13. What is the kernel of CATIA?

    CNEXT

14. Is it possible to directly enter the part design workbench, when we start the CATIA session, instead of assembly design workbench?

    No, we cannot enter directly into the part design.

15. What is the importance of sketch tools?

    This tool bar only appears when you are in sketcher workbench. The four tools found in
    this tool bar are toggle tools. When tool is highlighted the tool is on. This particular tool
    bar changes depending on what other sketcher workbench tool is currently selected.

16. How many degrees of freedom are there for points, lines, circles & ellipse in 2 dimensions?

    Degree of freedom for points & ellipse is 2 for circles it is 3 & for ellipse it is 5 in two
    dimensions.

17. What is the meaning of mean dimension?

    Mean dimension is the dimension that should be mean of all the dimensions, which are
    tolerance.

18. How many types of environment are available to start CATIA?

1. From desktop (motif)
2. From console (dterm)

19. What is hlr & nhr? What is their purpose?

    Hlr = hidden line removal
    Nhr = no hidden line removal
    Their purpose to visualize the solids in diffent modes.

20. What are Master W/S and Detail W/S?

Each model can have one Maser Workspace, in which the model is created & manipulated. A model can have zero or more workspaces called detail workspaces. These are auxiliary workspaces, contain elements that are to be duplicated to several locations in he Master. workspace. In addition, Detail workspace can also be organized into separate Library files using the LIBRARY FUNCTION. These can be shared with models to Allow Organizational standardization  Follow the blog to get more updates. Learn Catia faster and easier. To know more Click here